P1 Connector for SE, SE/30 Analog board

[iantm]

I received an SE with a burnt Molex P1 connector to the Analog board (the yoke cable).

I was able to remove it from the board.

I'd like to replace the part on both ends: the Female connection on the board and the Male plug on the CRT.

What are these part names?

 

[Peter-Erik]

Yes they still exist.

look at more and @JDW add links that bring you to mouser.

 

[GreenBar0n]

Stumbled upon this on ebay, remembered your post. Looks like a complete kit.

Kit, CRT Yoke Connectors for Apple Mac 128K, 512K, Plus, SE, SE/30, Classic | eBay

Mac 128k, 512k, Plus, SE, SE/30, & Classic. Using the crimp makes a factory-looking job though. Kit to repair burnt yoke connectors on. This kit is to fix burnt connectors, caused by bad solder joints on Analog Board.

www.ebay.com

 

[iantm]

Nice. Thank you for the find! So random… it's that kit and then mostly a bunch of audio equipment manuals.

 

[This Does Not Compute]

P1 on the analog board is Molex part number 15311046, and the shell for the CRT cable side is 19091049. Both are available from Mouser/Digi-Key if you'd rather order them that way.